Kammprofile Gasket with Loose Outer Ring: The metallic core is made with concentrically grooved profiling on both sides. > A notch is turned on the outer circumference of the core in which a loose centering ring. > With soft sealing layer in both sides.
Kammprofile Gasket with Loose Outer Ring (Floating)
Kammprofile gasket have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our Kammprofile gaskets
can be found in conventional power plants as well as in the primary circuit of nuclear power plants. In nuclear power plants, they are used e.g. as
a heat exchanger gasket, as a valve cap gasket or as a manhole cover gasket on steam generators or pressurisers
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize
erosion. Damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. Suitable for
male and female pipe flanges.
Advantages
• Outstanding sealing characteristics at a wide range of seating stress levels
• The gasket will not damage the flange surface and can be easily removed
• High resistance to severe temperature & pressure variation
• The gasket cores are reusable reducing cost usage
• Extreme temperature and chemical resistance
• Low initial sealing stress for installation
• Reliable sealing performance
• Can be reused
Application
• High pressure and high temperature applications
• Heat Exchanger and vessel applications
• Small flange widths & damaged flange
• Suitable for a range of chemicals
• Can be used for narrow flanges
• petrochemical industry
• Coolers., etc
Materials for metal Core
Core Materials |
Max Temperature |
Core Materials |
Max Temperature |
Core Thicknes |
SS 316L |
550 oC |
Inconel 625 |
450 oC |
2mm, 3mm, 4mm |
SS 304 |
550 oC |
Incoloy 825 |
450 oC |
|
Monel 400 |
600 oC |
Hastelloy B-2 |
450 oC |
|
Nickel 200 |
600 oC |
Hastelloy C 276 |
450 oC |
|
Inconel 600 |
900 oC |
Titanium |
350 oC |
|
Face Materials |
Max Temp |
Face Materials |
Max Temp |
|
Graphite |
550 oC |
PTFE |
260 oC |
Standard size
Thickness: 3.5mm, 4.0mm, 4.5mm, 5.0mm
We also provides other sizes, for details please contact us or send your inquiry directly to us